Protective Rail, 4" High
The BHS Protective Rail (PR) is a heavy-duty guard angle system which protects battery handling equipment and racking against damage at floor level. The PR is available in 3-foot, 4-foot, and 5-foot lengths (0.91 meters, 1.22 meters, and 1.52 meters). Anchors are not included.
- Single Level System Stands (BS-SL) with Drip Pans require a minimum roller height of 9.5″ (241 mm) for use with PR-4, and 11.5″ (292 mm) for use with PR-6
- If PR is being used in front of Single Level System Stands (BS-SL) with an Automatic Transfer Carriage (ATC) that is utilizing a host truck with 60″ (1524 mm) forks, an application review should be completed to verify there are no issues reaching the batteries on the stand.
- Hardwood Battery Station (HBS) units with Drip Pans should only use PR-4. The PR-6 is not recommended for this application because the pans cannot be removed as intended.
- PR should not be used with the Roller Wash Station (RWS) or Hardwood Wash Station (HWS), as the Drip Pan cannot be removed at all.
Use the BHS Protective Rail to guard your valuable equipment and comply with OSHA Standard 1926.441(b)(2), which requires “charging apparatus” to be “protected from damage by trucks.”
|Mfr. Part Number||PR-4|
California Residents: WARNING: This product contains chemicals known to the State of California to cause cancer and/or reproductive harm, and birth defects or other reproductive harm. Learn more here.